Pick the best computer case for airflow your build depends on the type of hardware you’ll use. It also depends on styling since that’s personal. Airflow is key for any framework. It allows fans to draw in cool air and emit heat. It is the most important thing to consider. This is where our group of the best computer case for airflow comes into play. They focus on thermal act.
5 best computer case for airflow
1. NZXT H7 Flow
The NZXT H7 Flow is built around this idea. It has many channels and spaces for you to run cables and draw them to places. This way you won’t block the flow of fans from any side. NZXT has also made the top panel open. This allows airflow to go in or out through an extra opening. It also adds space for heaters.
Speaking of which the NZXT can handle attracting a lot of them. The front and top of the case can fit up to 360mm heaters more than you need. If you want more fans the front panel can fit three 140mm fans. You also get two NZXT F Series fans with the case. They will save you some money. But if you want a better act you’ll likely get some third-party ones.
But this is a very negligible design. So you don’t get a lot of stuff for the I/O panel. There are two USB A and one USB C port. That’s not a dealbreaker. But it is something to consider if you need to plug in a lot of junk at the front of the PC.
2. Cooler Master MasterBox NR600
It’s not always easy to find an economy case with good airflow. But the Cooler Master MasterBox NR600 does a good job of it. It lacks a good cable system which is a shame. But it has top and front openings which give you much more airflow. But these are mesh openings. Some anecdotes suggest that mesh screens reduce airflow. But they also decrease the amount of dust sucked into the computer. So it’s a matter of compromise.
Either way, you have many airflow openings to work with. You can fit two radiators: up to 280mm in the front up to 240mm on the top and a 120mm one in the back. The back one is often used for the CPU but will be a tight fit. The front panel may also hold two 140mm or three 120mm fans. You can also fit two 140mm or two 120mm fans on the top panel. So you could have up to six fans if you include the 120mm fan in the back panel.
It can fit Micro ATX and ATX motherboards. It can fit a PSU up to 180mm long and a GPU up to 410mm long. You must recheck the last two sizes. Nothing is worse than buying something and not being clever enough to fit it in a case. This is a problem with mid-towers like this one and minor.
3. Corsair 7000D Airflow
The Corsair 7000D Airflow is a full-tower PC case. It can fit much any type of hardware. For example, the most GPU length is 450mm. This should even clear greater GPUs like the RTX 4090. But different copies have different sizes so it’s good to double check. A 190mm CPU cooler can also be used with the Corsair 7000D. This is beautiful impressive and more than enough especially if you plan to go for fluid cooling.
Its size is moving because it can fit up to 12 fans. That’s a mind-boggling number. It means you could fit three 360mm heaters in the case. But we’re not rather sure what you’d do with all that cooling. A specific 480mm heater for the front panel is a more option. It would be good for a high-end GPU like the RTX 4090. The top panel can fit up to a 420mm heater another good option for cooling a high-end GPU. As for the back panel, it can fit a 120mm or 140mm fan and a heater of the same size. Thus it’s a workable choice for CPU cooling.
Of course, there are downsides when commerce with a case so large. The main one is that it’s big and heavy so it can be hard to move especially if you need to lift it. That’s because it weighs a shocking 41.2 pounds. You should have a big cheese to help you with this. It won’t be an easy build. But that is the price of taking up so much space. For many it’s valued the energy.
4. Lian Li Lancool 205M
If you lack space and don’t know where to put your PC then a Micro ATX case is a great option. This smaller size gives you many more placement options. But it limits the size of the hardware you can fit inside. For instance, you must consider the fact that this space will only fit a Micro ATX or Mini ATX motherboard. Also, the GPU clearance is limited to 375mm which may pose issues for larger GPUs.
But you do have good options. You can fit up to a 240mm radiator on the top or front. You could do both but fitting all the tubing will be hard. You don’t need two big ones. A radiator cannot fit in the rear panel but a 120mm fan will. So if you plan to cool both your GPU and your CPU you’ll need to use a mix of top and front panel radiators. They will be of various sizes.
As for cable management, there are spots behind the motherboard for cables. This is good since the case is so small you’ll need somewhere to put them. The bottom panel is where the PSU goes. It is removable so that you can reach things a bit easier. But the small space does make it hard to do some stuff.
5. Cooler Master NR200P MAX
The Cooler Master NR200P MAX is different from your average case. It comes with some things pre-installed. This helps explain the higher price. For starters, it has its own 850w 80 Plus Gold PSU that also has custom-made cables. Because of the compact case Cooler Master took this action. You can’t fit a traditional PSU in it. So a smaller custom-made PSU makes a lot of sense.
The NR200P MAX has another thing pre-installed. A 280mm radiator with two 140mm fans. The tubing is also pre-made for you. In this case, it’s an SFX CPU cooler. You would need to remove the pre-installed radiator. Then you would need to install your own if you wanted to cool a GPU with a radiator. But cooling the CPU will be impossible. You can’t put a radiator elsewhere and the CPU sits below the GPU. So liquid cooling a GPU won’t work. Even in a smaller case, the airflow is still rather decent. The GPU you can fit in there won’t cause many issues. There’s only a 336mm length clearance and a 140mm height clearance.
Yes, the case is small but that adds to its allure. Working with it will be a little more hard. This is especially true because of the pre-installed hardware. But you can remove all the panels to get easier 360-degree access. Also, you may swing the GPU in and out for easy access by using a riser that mounts it on a hinge. Of course, the key thing to remember is that this only takes Mini ITX motherboards. So pick one that fits your needs. Less PCI e and RAM slots are found on most Mini ITX boards.
Also Read: Top 11 3 Month Computer Courses List In Demand After 12th
Choosing the best computer case for airflow
That wraps up our collection of the best computer case for airflow. The NZXT H7 Flow and the Corsair 7000D Airflow a good choices for most users. The Corsair 7000D Airflow is a compact choice to consider if you’re on a budget. It offers the same features as the Meshify 2 Compact and is rather cheap. Buy the Corsair 7000D Airflow if you are leaning towards a high-end PC build.
If you are building a new PC then see our collection of the best motherboards and the best CPUs. They are on this list along with the cases. Our ever-evolving collections are always updated with new options. So you’ll get the best ones on the market. Or you can also join our XDA Computing Forums. There you can discuss your build with fellow fans and get more references.
pc fan airflow direction
When you look at the side of a fan the arrow points sideways. It shows the direction the fan blades spin. Another arrow points up or down. It shows the direction the air flows. In this manner, you will know with speed how to install your fans in your case for proper airflow.
Does the case affect cooling?
Yes even in a chilly room the casing cannot reject the entire amount of heat inside it without a fan. The fan also evens out heat inside the case. If you had the computer in a very cold room parts of it would get too cold.
